Hydro Leduc MA50 Series Bent Axis Hydraulic Pump Flushing Valve Motor

Model Number: MA-50-C-K1-N1-U2-1-1-VB-F

4-Bolt SAE-C Flange, 1-1/4" Keyed SAE J744 Shaft

Speed RPM: 5000 MAX Continuous / 5500 MAX Intermittent

Max Flow: 66.4 GPM

Torque: 0.405 lbf.ft/psi

Torque at 5100 psi: 207 lbf ft

Max Allowable Pressure Continuous/Peak: 5800/6525 psi

MA MOTOR

MODEL CODE: MA-50-C-K1-N1-U2-1-1-VB-F

50 = DISPLACEMENT 50.3 cc/rev

C = MOUNTING FLANGE SAE-C 4-BOLTS

K1 = 1-1/4" KEYED SAE J744 SHAFT

N1 = INLET PORTS A AND B (SAE FLANGE PORTS) BOTTOM L0, REAR M0, SIDE N0, SIDE N0

U2 = DRAIN PORTS T1 AND T2 2

1 = SUITABLE FOR SPEED SENSOR (YES)

1 = SPEED SENSOR (YES)

VB = WITH FLUSHING VALVE

F = LOW TEMPERATURE OPTION NO(FKM)

LEDUC hydraulic motors of the MA series are of bent axis design, with an 

angle of 40°. They combine high performance and reduced size envelope. Global efficiency of over 90% (in most applications).

MA series motors are suitable for intensive long duty requirements. 

Designed for both mobile and industrial installations.

Typical applications are:

- vehicle transmissions;

- high power crushers;

- forestry equipment;

- heavy duty winches

These motors are built to suit all applications with SAE (J744) mounting configurations.